No Products in the Cart
Glass pipes for smoking is a common problem encountered by many people when using hand blown glass pipes. Under what circumstances will glass pipes for smoking occur?
Facts have proved that the structural relationship between glass pipes for smoking and atomizer is not large, which is usually caused by the following conditions:
Many glass pipes for smoking are cotton problems. The coils we make are perfect. Why do we still use glass pipes for smoking, perhaps because we wear less cotton. When we wear it, we clearly fill the cotton loop, but because the cotton shrinks, after the cotton is wetted by soot oil, the cotton becomes thinner and cannot fill the loop. Dissatisfaction with the cotton in the middle of the coil will cause glass pipes for smoking, that is, heating is not uniform enough.
Glass pipes for smoking has an inevitable relationship with electricity, for example, the low power resistor we use is 0.5Ω. Generally, when we push it to about 30W, we can atomize it relatively completely. However, if we use 20w or 15W, the power is insufficient, which will lead to slow heating speed and insufficient atomizing speed of lampblack oil. Therefore, the situation of glass pipes for smoking will also occur. Excessive power will also lead to glass pipes for smoking.
Glass pipes for smoking and temperature control are more likely. This is inevitable, because the temperature control needs to rise in an instant, and the output belonging to the explosion point will also show the glass pipes for smoking phenomenon. The loose winding is used for temperature control of nearly 200 degrees, which is more likely to show glass pipes for smoking than the closed winding.
VG/PG, 5vg5pg, 6vg4pg, etc., of which the proportion of glass pipes for smoking is 4vg6pg, which is the common proportion of Malaysian soot oil, i.e. glass pipes for smoking will also occur if the soot oil is not thick enough. Malaysia's cooking oil is well used, but sometimes glass pipes for smoking is also related to the proportion of cooking oil.
Why is fancy hot silk easy to fry? Simply put, because fancy heating wires need more heating wire quality than ordinary heating wires under the same resistance, the normal power of heating wires cannot meet the output power of clapton, and the glass pipes for smoking phenomenon will also occur. As long as the power increases, the problem of glass pipes for smoking can be solved.